Last reviewed: October 2026
In short: lil SOLID 2.0 is an all-in-one heated tobacco device made by KT&G and sold under the IQOS range. It uses HEETS sticks. TEREA sticks do not fit it, because they are made for IQOS ILUMA only. It gives 3 sessions in a row and runs on a 2950 mAh battery. We are a store in Kuwait: you can collect it from our Salmiya or Rigai branch, or we ship it to Saudi Arabia with tracking.
What is lil SOLID 2.0?
lil SOLID 2.0 heats a real tobacco stick instead of burning it, so there is no ash and no smoke smell. It is not vaping: there is no coil and no e-liquid, only a device and a stick. The design is all-in-one: the battery and the heating element sit in one pocket-sized body, with no separate holder and no charging case. You insert the stick, press the button and start.
You will see it written as lil SOLID 2.0, Lil Solid, IQOS lil SOLID and, in Arabic, as ليل سوليد. These are the same device, listed on our lil SOLID 2.0 product page.
Which sticks work with lil SOLID 2.0?
Check this before you buy, because the wrong sticks will not heat properly:
| Sticks | Works with lil SOLID 2.0? | Notes |
|---|---|---|
| HEETS selections Amber, Yellow, Silver, Bronze, Sienna, Dimensions Apricity |
Yes | The sticks made for lil SOLID 2.0 and IQOS 3 DUO. One carton is 10 packs of 20 sticks (200 sticks). |
| NUSO Blue 200, Yellow 200, Brown 200, Green 20, Beach 20, Carmine 20 |
Likely yes | Listed with us as compatible with blade-heated devices (E10, ISMOD and IQOS). Ask us on WhatsApp which pack suits your device before ordering. |
| TEREA | No | Made for IQOS ILUMA devices only. They heat through a metal part inside the stick itself. |
| BLENDS | No | Made for the BONDS device from Philip Morris. |
The reason is the heating method. lil SOLID 2.0 heats the stick from the inside with a heating element, like the older IQOS devices. IQOS ILUMA has no blade and heats by induction, so each stick belongs to its own device. The full device and stick map is in our IQOS Kuwait guide, and all sticks are in the IQOS section.
lil SOLID 2.0 specifications
| Specification | lil SOLID 2.0 |
|---|---|
| Device type | All-in-one, single piece |
| Manufacturer | KT&G, distributed by Philip Morris (PMI) |
| Released | 2021 |
| Compatible sticks | HEETS |
| Battery | 2950 mAh |
| Consecutive uses | 3 sticks in a row |
| Full charge | About 2 hours, USB-C |
| Heating temperature | 350 °C |
| Heating time | About 25 seconds |
| Session length | 5 minutes or 14 puffs, whichever comes first |
| Size and weight | 106 x 31 x 22 mm, 99 g |
How to use lil SOLID 2.0
- Insert a HEETS stick into the slot until it sits firmly. Do not twist it.
- Press and hold the button until the device vibrates and the light starts pulsing. Heating has begun.
- Wait about 25 seconds. A second vibration and a steady light mean it is ready.
- Use it for 5 minutes or 14 puffs. The device vibrates and the light pulses shortly before the session ends.
- Remove the stick by pulling it straight out, then start the next one straight away if you like, up to three in a row.
Charging lil SOLID 2.0
It charges over USB-C with the supplied cable and takes about two hours from empty to full. A normal phone charger is fine. Do not charge it in a hot car, because heat is the most common reason for a red light in a Kuwait summer. A full charge usually lasts a normal day of use.
What the lights mean
The device has a single indicator light. Its colour and blinking pattern are its way of talking to you:
- White: normal. It pulses while heating and charging, and stays steady when ready. A quick white blink near the end of a session means a few puffs are left.
- Red, flashing: usually the device is outside its temperature range, the battery is empty, or it has a fault. Let it come back to room temperature for 10 to 15 minutes, charge it for at least 10 minutes, then reset it by holding the button for about 10 seconds.
- Yellow or orange flashing: in most cases the battery is low or the temperature is out of range. Charge it, let it cool or warm up, then reset if needed.
A 10-second button reset fixes most light problems. If the red light stays after that, send us a photo on WhatsApp.
lil SOLID 2.0 vs IQOS 3 DUO vs IQOS ILUMA ONE
| lil SOLID 2.0 | IQOS 3 DUO | IQOS ILUMA ONE | |
|---|---|---|---|
| Design | Single piece | Holder plus charging case | Single piece |
| Sticks | HEETS | HEETS | TEREA |
| Heating | Internal heating element | Heating blade | Induction, no blade |
| Consecutive uses | 3 | 2 | Depends on charge, no holder |
| Battery | 2950 mAh | 2900 mAh (case) | 1728 mAh |
| Cleaning | Light, occasional | Regular blade cleaning | None needed |
If you want to stay on HEETS in a single piece with no case, lil SOLID 2.0 is the direct choice. If you prefer the newer TEREA sticks and no cleaning, look at IQOS ILUMA ONE. If you like the holder and case system, there is IQOS 3 DUO.
Buying lil SOLID 2.0 in Kuwait or Saudi Arabia
We are a store in Kuwait, so we cannot ship lil SOLID 2.0 worldwide. What we do:
- In Kuwait: message us on WhatsApp, we prepare the order, and you collect it from our Salmiya or Rigai branch, or we deliver. See how ordering works and delivery in Kuwait.
- Saudi Arabia: we ship with a tracking number. Details in shipping vape from Kuwait to Saudi Arabia.
- Anywhere else: ask us on WhatsApp first.
Frequently asked questions
What sticks work with lil SOLID 2.0?
HEETS sticks. We stock six HEETS selections: Amber, Yellow, Silver, Bronze, Sienna and Dimensions Apricity. TEREA and BLENDS sticks do not fit it.
Does lil SOLID 2.0 work with TEREA sticks?
No. TEREA sticks are made for IQOS ILUMA devices only. lil SOLID 2.0 uses HEETS.
Can I use NUSO sticks in lil SOLID 2.0?
Our NUSO listings say they fit blade-heated devices such as E10, ISMOD and IQOS. Message us on WhatsApp for the right pack for your device before you order.
Is lil SOLID 2.0 the same as IQOS 3 DUO?
No, but they use the same HEETS sticks. lil SOLID 2.0 is a single all-in-one piece that gives 3 sessions in a row. IQOS 3 DUO has a separate holder and charging case and gives 2 sessions in a row.
How long is one lil SOLID 2.0 session?
Five minutes or 14 puffs, whichever comes first. Heating takes about 25 seconds, and you can start the next stick straight away, up to three in a row.
Why is the light red and flashing?
Usually the device is too hot or too cold, the battery is empty, or it needs a reset. Let it return to room temperature, charge it, then hold the button for about 10 seconds to reset.
Is lil SOLID 2.0 vaping?
No. It is a heated tobacco device that heats a real tobacco stick without burning it. There is no coil and no e-liquid.
Do you ship lil SOLID 2.0 outside Kuwait?
We sell from our Salmiya and Rigai branches in Kuwait and ship to Saudi Arabia with a tracking number. For any other country, ask us on WhatsApp first.
Not sure which device or sticks you need? Message us
Tell us which sticks you use now and how many a day, and we will tell you whether lil SOLID 2.0 fits or a different device suits you better:
- Salmiya branch: +965 5088 3667 – open 24 hours
- Rigai branch: +965 5112 4370 – 8 am to 4 am